The liposuction handle which can connect with the laser machine and suctions machine at same time
One handle with fiber needle, top and side openings of needle. The end of the handle connect with the laser fiber, the side connector to connect with the liposuction machine tube. The laser fiber is used to melt the fat by the laser machine. |
The suction tube connected the suction machine is used to get the melted fat our of the body.
Then this liposuction handle combine the laser fiber and the suction tube together and make the laser machine and suction machine working together, to let the melting fat and getting the melted fat out of the body working together too. |
When connect with the bare fiber and radial fiber
If you want to get fat out after lipolysis,there are three ways to get the fat out.
First, small area like eye bag can choose the metabolism to naturally unload the body after laser lipolysis. Drink more water and exercise more to speed up body’s metabolism.
Second, after laser lipolysis the fat into small parts, the melted fat can be discharged through a syringe.
Third, after melting the fat in large area, like leg, belly and so on, you can choose to use a suction machine or syringe to discharge the fat.
So when you do the lipolysis with big part, then you can use our liposuction to connect wit the laser machine and suction machine to make it working together, to make the treatment more easier.
The advantage of our laser machine and suction machine working together: Double improvement in efficiency and safety.
A single operation can simultaneously complete lipolysis and suction, which reduces the operation time by 30%-50% compared with traditional solutions.
– Laser pre-dissolution reduces the physical trauma of mechanical suction, and the incidence of postoperative bruises and hematomas decreases by 40%.
– Real-time temperature monitoring controls the risk of epidermal burns to less than 0.1%.
– The laser thermal effect stimulates the remodeling of dermal collagen and improves the problem of postoperative skin sagging.
– Accurate fat layering (deep dissolution + shallow micro-suction) achieves a more natural body curve.
Specification
Fiber installing | Optical bare fiber or Radial fiber |
Needles size | Length: 100mm, 150mm, Diameter: 2.5mm
Length: 200mm, 250mm, 300mm, Diameter: 3.0mm |
Material | Stainless steel |
The liposuction handle which can connect with the laser machine and suctions machine at same time
One handle with fiber needle, top and side openings of needle.
The end of the handle connect with the laser fiber, the side connector to connect with the liposuction machine tube.
The laser fiber is used to melt the fat by the laser machine.
The suction tube connected the suction machine is used to get the melted fat our of the body.
Then this liposuction handle combine the laser fiber and the suction tube together and make the laser machine and suction machine working together, to let the melting fat and getting the melted fat out of the body working together too.
When connect with the bare fiber and radial fiber
If you want to get fat out after lipolysis,there are three ways to get the fat out.
First, small area like eye bag can choose the metabolism to naturally unload the body after laser lipolysis. Drink more water and exercise more to speed up body’s metabolism.
Second, after laser lipolysis the fat into small parts, the melted fat can be discharged through a syringe.
Third, after melting the fat in large area, like leg, belly and so on, you can choose to use a suction machine or syringe to discharge the fat.
So when you do the lipolysis with big part, then you can use our liposuction to connect wit the laser machine and suction machine to make it working together, to make the treatment more easier.
The advantage of our laser machine and suction machine working together: Double improvement in efficiency and safety.
A single operation can simultaneously complete lipolysis and suction, which reduces the operation time by 30%-50% compared with traditional solutions.
– Laser pre-dissolution reduces the physical trauma of mechanical suction, and the incidence of postoperative bruises and hematomas decreases by 40%.
– Real-time temperature monitoring controls the risk of epidermal burns to less than 0.1%.
– The laser thermal effect stimulates the remodeling of dermal collagen and improves the problem of postoperative skin sagging.
– Accurate fat layering (deep dissolution + shallow micro-suction) achieves a more natural body curve.
Specification
Fiber installing | Optical bare fiber or Radial fiber |
Needles size | Length: 100mm, 150mm, Diameter: 2.5mm
Length: 200mm, 250mm, 300mm, Diameter: 3.0mm |
Material | Stainless steel |
Hangzhou Arfurla Science & Technology Co., Ltd. is a high-tech company engaged in development, research, production, sale and after-sales service.
© All Copyright 2025 by Hangzhou Arfurla Science & Technology Co., Ltd. | Privacy Policy