Laser lipolysis and Эндолифт are two latest innovations in laser-based aesthetic treatments used for fat reduction and skin lifting. These minimally invasive procedures employing diode laser are increasingly practiced by aesthetic doctors for tackling problem fat and sagging skin. With little to no downtime, they provide alternative to invasive surgical methods of fat removal and skin lifting.
Despite both treatments using similar technology, the differences in laser wavelengths, action, treatment approaches and results are such that each can be applied to specific situations.
1. Technology and Mechanism of Action
Laser Lipolysis
In laser lipolysis, fat cells are targeted and then destroyed by laser energy. The laser is inserted under the skin by means of a fine fiber and subsequently the fat cells are changed into an oil-like liquid. This then is either burned by the body itself or removed with gentle suction.
The laser typically used for lipolysis has a wavelength of 980nm. This wavelength is absorbed by fat and hemoglobin and therefore leads to coagulation of the bleeding vessels. Additionally, the heat from the laser induces secondary collagen remodeling, which results in moderate skin tightening.
Эндолифт
Endolift, often performed with a 1470nm diode laser or dual 980nm/1470nm platforms, uses micro-optical fibers inserted into the superficial skin layers. The 1470nm wavelength exhibits high absorption by water and fat, enabling efficient lipolysis and immediate skin contraction.
This stimulates collagen production and metabolic activity in the extracellular matrix, resulting in superior subdermal remodeling and lifting effects.
Arfurla 980nm and 1470nm Diode Laser Technology
Arfurla offers multifunction diode laser systems operating at 980nm and 1470nm. The 980nm laser is known to effectively target vascular tissue and perform moderate lipolysis with minimal risk of bleeding. The 1470nm laser performs deep fat melting and creates pronounced retraction of the skin.
2. Treatment Areas
Laser Lipolysis
Laser lipolysis is used for body contouring of larger areas of the body, including the abdomen, thighs, arms, flanks and back. This treatment method is suitable for moderate to larger amounts of body fat that do not seem to budge with diet and exercise.
Эндолифт
Endolift is recommended for facial skin and neck, as well as the jawline and submental area, for skin lifting and localized fat reduction. It can also be used for body treatment with mild looseness of the skin and small amounts of fat in areas where very small access points are preferred for precise contouring.
Arfurla AFL Medical 12-in-1 Platform
The Arfurla AFL Medical 12-in-1 platform is designed to support both facial Endolift procedures as well as bodylift lipolysis procedures, enabling a practice to treat a variety of different patient requests with a single piece of equipment.
3. Fat Reduction and Skin Tightening
Laser Lipolysis
The primary objective of laser lipolysis is fat reduction. Laser energy disrupts adipocyte membranes, releasing liquefied fat that the body metabolizes or that is aspirated.
Skin tightening occurs as a beneficial secondary effect from thermal stimulation but is generally less pronounced than in dedicated lifting procedures.
Эндолифт
Endolift is a non-invasive and effective treatment that delivers dual-action benefits to the skin. The high water affinity of the 1470nm wavelength quickly breaks down fat within the skin, whilst immediately contracting skin fibers and stimulating new collagen production, or neocollagenesis. This leads to immediate skin tightening and subsequent progressive improvement in skin’s firmness and elasticity.
Dual-Wavelength Treatment Benefits
Dual-wavelength systems such as Arfurla’s take advantage of 980nm Hb absorption for coagulation and safety, and 1470nm excellent penetration for fat and water, allowing better lipolysis and skin retraction over different tissues.
4. Invasiveness and Procedure Type
Endolift and laser lipolysis are two minimally invasive procedures carried out under local anesthesia. Usually, they are performed in the doctor’s office and do not require any time for recovery.
Laser lipolysis may be accompanied by aspiration in order to remove even more fat. Endolift, on the other hand, is carried out with ultra-fine fibers, as thin as a hair, that are very non-invasive and allow the patient to leave the office right after the treatment. This is why Endolift is often described as a “walk-in, walk-out” treatment.
Arfurla lasers are equipped with high precision power output of 14-22W and various accessories such as optical fibers and handpieces, allowing for safe and effective delivery of energy in a fan shape.
5. Downtime and Recovery
Laser Lipolysis
Patients can return to normal activity within a few days as there is minimal downtime. Non-aspiration laser lipolysis may result in slight swelling or bruising for up to 1-2 weeks after the treatment. However, this is typically mild and resolves on its own.
Aspirated laser lipolysis may result in more noticeable swelling for up to 1-2 weeks after the treatment.
Эндолифт
Endolift recovery is minimal. Patients can return to normal activities immediately after treatment. Patients might have some mild swelling that resolves within a few days to a week after treatment. The rebuilding of collagen continues for weeks to months after treatment.
Both technologies offer many key characteristics to make them very suitable for busy practices that aim to provide very high patient satisfaction while operating efficiently.
6. Results and Effectiveness
Laser Lipolysis
Results develop slowly as the body metabolizes the emulsified fat. Results for contouring develop in several weeks to months. More treatments are usually needed for larger areas.
Эндолифт
Endolift results start to become apparent as early as 2-4 weeks after treatment, with gradual decrease in fat and improvement in skin firmness that reaches its peak around 2-3 months after treatment. Patients particularly like the lifting effect of Endolift on the face.
Clinical feedback for the treatment with the Arfurla 980nm/1470nm system consists of effective fat reduction and skin shrinkage with high level of collagen production and minimal side effects.
7. Ideal Candidates
Laser Lipolysis Suitable For
Laser lipolysis is suitable for patients with moderate to larger fat deposits. It is also suitable for patients looking for body sculpting who want a less invasive alternative to traditional liposuction.
Endolift Suitable For
Endolift is best for patients with mild to moderate degree of skin laxity and localized fat. It is especially suitable for face and neck areas and for patients who are looking for a subtle but noticeable improvement without any invasive surgery.
Comparison Table: Laser Lipolysis vs Endolift
| Особенность | Laser Lipolysis | Эндолифт |
| Длина волны | Often 980nm or similar | 1470nm, or dual 980/1470nm |
| Main Goal | Fat reduction with secondary tightening | Fat reduction + primary skin tightening/lift |
| Treatment Areas | Body, abdomen, thighs, arms | Face, neck, jawline + localized body areas |
| Инвазивность | Minimally invasive ± aspiration | Minimally invasive, ultra-fine fiber |
| Восстановление | Minimal to 1-2 weeks | Minimal, same-day return |
| Results Timeline | Gradual fat metabolism | Immediate tightening + progressive results |
| Best For | Body contouring | Facial rejuvenation and precise lifting |
Applications and Advantages of 980nm 1470nm Systems
Arfurla’s multifunction platforms go beyond fat dissolution and Endolift procedures. Arfurla’s platforms are designed to perform a variety of treatments and allow clinicians to expand their practice offerings, including EVLT, proctology, dentistry, gynecology, ENT and many others.
The key advantages of the platforms include precise energy delivery with minimal bleeding and discomfort, collagen stimulation for lasting skin quality improvement, outpatient compatibility with local anesthesia, versatile accessories such as optical fibers and handpieces for multiple indications, and high absorption profiles enabling efficient treatment of various fat types and tissue densities.
Why Choose Arfurla as Your Supplier?
С Арфуром is a professional manufacturer and factory of high-quality 980nm 1470nm diode laser equipment.
Arfurla has in-house R&D, production and quality control. We offer OEM/ODM service to our distributors all over the world. Our product AFL Medical 12-in-1 system has 12 functions, very complete functions.
Our price is very competitive at factory direct. We also provide very good after-sales service. We have many certifications, such as CE, FDA, etc.
Часто задаваемые вопросы
Laser lipolysis versus Endolift?
The main difference between laser lipolysis and Endolift is that laser lipolysis focuses on fat reduction, whereas Endolift, especially with the 1470nm technology, focuses on fat melting and skin tightening/lifting.
What wavelength to use for skin tightening?
1470nm is best as it is more absorbed by water than other wavelengths, providing the best collagen remodeling and skin contraction as opposed to broader lipolysis wavelengths.
Is Endolift Fine Fiber suitable for facial treatments?
Yes. Endolift with Fine Fibers is very effective and safe for all facial and neck treatments.
How long will results last?
Results can last for long as well as improve with a healthy lifestyle. Since we stimulate collagen production, the improvements will be sustained.
How long is typical treatment time?
Typically, treatment time is 1-2 hours per session. This time can vary depending on the size of the area being treated.
Partner with a Trusted Manufacturer and Supplier for Premium Laser Solutions
Aesthetic clinics, medical spas, and distributors seeking reliable, high-performance equipment should source from an established factory like Arfurla.
The 980nm 1470nm multifunction diode laser machine delivers versatile Endolift and Bodylift lipolysis capabilities, along with additional clinical applications, enabling expanded service offerings and strong ROI.
Arfurla can provide you with detailed specifications, competitive wholesale price, OEM/ODM service as well as other service support. Arfurla can provide high quality aesthetic laser products to you all over the world and help your clinic to improve.
Связаться с нами for more information at info@arfurla.com or add our WhatsApp +86-1830-1023-578 to get a quotation and discuss cooperation with us.
